Can run the game LPC2103 IC electronic components ARM development board TFT true color screen learning board

Can run the game LPC2103 IC electronic components development board ARM development board TFT true color screen learning board

CPU: 32-bit ARM chip used PHILIPS micro controller -LPC2101/2103
LPC2101/2103 based on a real-time simulation of ARM7TDMI-S CPU, and embedded with 8kB and 32kB high-speed Flash memory. 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code can run at maximum clock rate. This makes the interrupt service routine and important functions in the DSP algorithm performance increased by 30% over Thumb mode. Strict control on the code size applications can use 16-bit Thumb mode reduces code by more than 30%, while the performance loss is small.
As LPC2101/2102/2103 very small size and low power consumption, they are very suitable for those who will be small as the main requirements of the application, a number of UART, SPI to SSP and two I2C bus serial communication interface composed of a mixture and the SRAM chip with the role of 2kB/4kB/8kB can be used to achieve the ideal for making LPC2101/2102/2103 communication gateways and protocol converters, math coprocessor, and a large enough buffer space, processing power. The number of 32-bit and 16-bit timers, a 10-bit by the improved ADC, PWM characteristics (through all the output match on a timer to achieve) and 32 fast GPIO (containing up to nine edge or level sensitive external interrupt pin) to make them especially suitable for industrial control and medical systems.

Key Features:
. 16/32 Bit ARM7TDMI-S processor, a very small LQFP48 installed.
. 2kB/4kB/8kB-Chip static RAM, 8kB/16kB/32kB chip Flash program memory, 128-bit wide interface accelerator enables high-speed 70MHz for.
. Through the on-chip Boot-loader software in the system / application code (ISP / IAP).
. Flash programming time: 1ms programmable 256 bytes, a single Flash sector erase or full chip erase just 400ms.
. EmbeddedICE RT RealMonitor through the on-chip debug software to provide real-time.
. 10-Bit A / D converter with 8 analog inputs, each channel conversion time as low as 2.44μs.
. Dedicated result registers to minimize interrupt overhead.
. 2 A 32-bit timers / external event counter, 7, with 7 capture and compare channels.
. 2 16-bit timers / external event counters, with a 3-way acquisition and 7 compare channels.
. Low-power real time clock (RTC), an independent power supply and dedicated 32kHz clock input.
. Multiple serial interfaces including two UART (16C550), 2 Fast I2C-bus (400kbits / s) and with buffering and variable data length capabilities of the SPI and SSP.
. Vectored interrupt controller with configurable priorities and vector addresses.
. Up to 32 5V tolerant general-purpose I / O port.
. Up to 13 edge or level sensitive external interrupt pins.
. Through the programmable-chip PLL (possible input frequency range: 10MHz ~ 25MHz) can be achieved up to 70MHz of CPU clock frequency.
. On-chip oscillator, working at 1MHz ~ 25MHz external crystal under.
. Power-saving modes include Idle mode, RTC effective sleep mode and power-down mode.
. Through a separate peripheral functions enable / disable and adjust the peripheral clock to achieve power optimization.
. Through an external interrupt or RTC to wake up the processor from Power-down mode.

LPC2103 development board hardware components:
. CPU LPC2101/21103
. TFT true color LCD screen 160 * 128 dot matrix
. USB device socket (powered by)
. RS232 interface to a connected
. The standard 20-pin JTAG debug interface, a pin
. 9 Key keyboard
. Buzzer
. Self-locking power switch
. RTC battery
. LED
. Board size: 110 * 70mmm


ZLPC2101/2103 development board include:
1, the test developed by the LPC21011/2103 Board issued a Board
2, a serial line
3, USB cable a (powered by)
4, with the board a complete information and data CD
1) Keil for ARM (Evaluation)
2) The serial port tool
3) Sample Code
4) LPC2101/2103 circuit diagram (PDF format)
5) LPC2101/2103 development board laboratory manual (PDF format)
6) The development board used part of the chip manual, information


ZLPC2103 experimental development board include:
. GPIO input / output experiment: LED and buzzer output, key input.
. PWM: demonstration using four components to the LCD backlight
. English and Chinese characters showed that the experimental
. Color bitmap display BMP
. A / D input: demo only takes one line of multi-key keyboard port.
. RTC experiment
. Timers experiment
. Serial Experiments
. uC / OS real-time operating system test
. Snake game source code


ZLPC2101/2103 development board features:
1, with 160X128, TFT color LCD screen, color, colorful, excellent results.
2, with the CPU terminals to facilitate the measurement, test.
3, fully compatible with ULINK as Jtag emulator debugger, fast and easy to use.
4, using easy to use as a development and debug environment KEIL
5, built-in Tetris game, lively and interesting.
6, 9 key import Omron mining large buttons feel very good.
7, the warranty for three months, by E-mail, QQ, MSN and other means to provide free technical support.
8, simple, easy, concise textbook is ideal for entry-level use, to quickly get started, naturally give a return to three, by analogy, from 51 the best way to transition to the ARM.