JINOU-5272 goip gsm gateway

JINOU-5272 goip gsm gateway

INTRODUCTION
Mobiles can support Internet function but slowly, xDSLCable modem can access the Internet but fixed. Only bluetooth wireless technology takes all the advantages to realize high speed and moveable connection to the Internet . Bluetooth Gateway is the key device to bridge wireless and wired network fast and freely. With Bluetooth Gateway, you can enjoy the Internet anytime anywhere.
JINOU-5272 Bluetooth Gateway is the first bluetooth gateway product under its own intellectual property in China. The gateway link bluetooth terminal to existing wired network, such as PSTN, DDN, ISDN, Internet, ADSL to realize bluetooth station to access the Internet and telecontrol bluetooth devices or other equipments in other network.


Key Features
1.Bluetooth Gateway is compliant with bluetooth standards, adopts Time-Division Multiple Access technology, supports asynchronism transmission and point to point or point to multipoint bluetooth data communication. Bluetooth terminal and its piconet can communicate with traditional wired network by TCP/IP protocol.
2. It's small. Dimension:150mm*100mm*50mm
3.analyze bluetooth protocol, TCP/IP protocol and IEEE802.11 standard, interpret bluetooth address to IP address, support part of software function on protocol conversion in multi-operating system.
4. Protocol stack implement technology from physical layer to transport layer. Adopt universal ethernet interface as physical layer interface of LAN. Realize protocol conversion between bluetooth and TCP/IP by SCM.
5. Piconet adopts HUB top structure, supports SCO/ACL wireless link and host & multi-slave mode. Based on sub protocol, Bluetooth Gateway resolved route problem by software dynamic route path arithmetic to realize communication among different bluetooth piconet.
6.Supports bluetooth data and voice communication, encapsulated most of HCI instructions. Voice communication function widen its use area.

Bluetooth Gateway comprised of cells as following
·Bluetooth Equipment Interface Cell
·RF Cell
·Ethernet Interface Cell
·Protocol Implement Cell
·Protocol Conversion Cell
·Management Interface Cell

System Configuration Structure
Each bluetooth equipment which connected to Bluetooth Gateway must bind to a TCP port of Bluetooth Gateway. Thus, we can uniquely identify the bluetooth terminal in the LAN or the Internet by IP and TCP port. When bluetooth equipments are communicating with the host, Bluetooth Gateway takes charge of conversion work between bluetooth protocol and TCP/IP, enable data exchange between bluetooth equipments and computer network transparently.

1.Dimensions 150mm*100mm*50mm
2.Weight 240g
3.Input Voltage 6v
4.Input Current 60-80mA
5.Link Power 160mw
6.Transmission Power 0dbm OR 20dbm
7.Receiver Sensitivity -85dbm
8.Operating Temperature -40℃-50℃
9.Wireless Range 0m-15m
10.Operating Mode Host - Slave
11.Network Type Piconet
12.Transmission Rate 732kb/s
13.Standards Compliance Bluetooth protocol of HCI layer
14.Edition V1.0
15.Interface RJ45
16.Frequency Band 2.4GHz
17.Data Link Mode SCOACL