SZRUNSUN Single CDMA FWT FWT2010-810

SZRUNSUN Single CDMA FWT FWT2010-810

1, The full name of FWT is Fixed Wireless Terminal, designed to work on mobile frequency networks. It can be connected to single line telephones(SLT) or PABX systems using analogue SLT ports. It takes a standard mobile phone sim card and make a call.
2, Our GSM FWT meets to the China National Communication Standards YD/T884-1996. It also accord with the Europe Communication Standards. It is permitted to use in GSM network.
3, It is a mobile phone like device that produces a dial tone and make a call, SZRUNSUN Single GSM FWT is RJ-11 of FXS/FXO port connection of any PBX, VoIP Gateway, headline phones or system.

Parameters
1.CDMA Frequency 800Mhz.
2.FWT
-Standby voltage:45-50V Ringing voltage:75V
-Hanging voltage: 9-14V. Supply power: 23mA/s.
3.Operate
-Dialing tone: 420Hz, Busy tone: 450Hz.
-Channel interval: 200 KHz. Line impedance: 600 Ohm
4.Antenna
-Antenna amplifying>4.5DB. Sensitivity<-104DBM.
-Length: 3M, Transmitting power: <3W.
-INPUT: AC175~260V, OUTPUT: +9V/1000MA.
5.Package
-Main unit: 1 set. Antenna: 1 piece.
-User Manual:1 volume. 12V/1.2A Power: 1 piece.
-Volume: 156*115*30MM. Weight: 0.8Kg.

Description of Function
1)standard RJ-11 of FXO/FXS to telephone or voip gateway & PABX & PSTN
2)DTMF detector in RJ-11
3)Precise reverse polarity
4)Caller id (DTMF, ONE RING) to telephone or voip gateway & PABX
5)Single-handed power switch
6)LED indicating Hook On/Off, Talking, signal intensity, Power On/Off
7)Strong signals with high gain antenna
8)Add prefixed IP number to dail
9)Second dial tone
10)Insert CDMA UIM card
11)Base station rotation

Optional Function:
bar incoming calls
lock sim card
Write ESN for no mobile UIM card country
lock mobile service provider
Connect to VoIP Gateway for voip termination
Connect to PBX system
Connect to Public-phone system