GT-720FL (Flash version with Data logger function)
Fast Acquisition Enhanced Sensitivity 65 Channel GPS Sensor Module

*Acquire and track 65 satellites simultaneously
*Venus 6 correlators
*Signal detection better than -160dBm
*Reacquisition sensitivity 155dBm
*Cold start < 30 seconds at 147dBm
*Hot start < 1sec under open sky
*5m CEP accuracy
*SBAS (WAAS, EGNOS) support
*Support A-GPS function
*2M Bytes flash memory for data logging, with 16 bytes binary data per record that stores up to 256K data records
*Log data can be exported to mapping software such as Google Earth and TrackMaker
*Logging data interval programmable: by time or distance
*< 26mA with Tracking current
*Support active and passive antenna
*Flash-memory based
*Dimension: 34 x 34 x 9.20 mm

Introduction:
The GT-720F(L) is a compact all-in-one GPS module solution intended for a broad range of Original Equipment Manufacturer (OEM) products, where fast and easy system integration and minimal development risk is required.

The receiver continuously tracks all satellites in view and provides accurate satellite positioning data. The GT-720F(L) is optimized for applications requiring high-performance, low cost, and maximum flexibility; suitable for a wide range of OEM configurations including handhelds, sensors, asset tracking, PDA-centric personal navigation system, and vehicle navigation products.

The GT-720F(L) is capable of keeping up to 256K records or positions, including longitude, latitude, speed, UTC, and tag data. The location histories can be exported to mapping software such as Google Earth or TrackMaker

Its 65 parallel channels and Venus 6 search bins provide fast satellite signal acquisition and short startup time. Acquisition sensitivity of 155dBm and tracking sensitivity of 160dBm offers good navigation performance even in urban canyons having limited sky view..

Satellite-based augmentation systems, such as WAAS and EGNOS, are supported to yield improved accuracy. Besides it also supports A-GPS function and fixed in the short time.

RS232-level serial interface are provided on the interface connector. Supply voltage of 3.8V~8.0V is supported.

Users can modify NMEA sentences or Binary code by the extra flash memory.